Schneider Electric | TeSys K Series | Control RelaysCreating seamless integration in all automation applications, compactness ratio and high performance, the TeSys K series is a range of reversing or non-reversing contactors. All 4 pole relays have 10A thermally rated contacts which are suitable for AC or DC control voltages. In addition the series also features low consumption coil versions with built in suppression which are suitable to be used with programmable controllers.Features and Benefits: • Common options available for all 6, 9, 12 A ratings • AC and DC Control circuits available • Low-consumption DC and silent • Variety of auxiliary contacts, and timer modules • Clamp terminals as standard with spring terminal, printed circuit board connection and fast-on connector types available • Consistent connection tightness • Power consumption for Vac types 4.5 VA • Power consumption for Vdc types 2.4 W • Resistance to vibration & temperature cycling • Din or screw fixingProtection ratings & Safety features: • BS 5424, IEC 60947, NF C 63-140 and VDE 0660 standards • CSA and UL certification • IP2x protection • TC conforming to IEC 60068Applications - Ideal for Zones sensitive to noise, disturbed mains supplies, industry, building and infrastructure. Other applications include: • Switching contactor or relay coils • Powering control and signalling equipment • Simple control systemsNoteRelays are positively guided.Schneider Electric CA3KN22EDTeSys K control relay, 4 contacts (2NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 48V DC control circuit with no inrush consumption, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).