Specs at a glance Process temperature: –40 °C ... +600 °C Conformities: Approved for plants requiring approval 2001/80/EC (13. BImSchV) 2000/76/EC (17. BImSchV) 27. BImSchV TA-Luft (Prevention of Air Pollution) EN 15267 EN 14181 MCERTS 2010/75/EU U.S. EPA PS-11 compliant ---------------------------------------- Field of application Endress Hauser's The DUSTHUNTER SB100 is a type-approved measuring device for dust at very low to medium concentrations in challenging applications, e. g., in hot or corrosive gases. The measurement is based on the backward scattering of light. Installation is from one side only. Two different penetration depths are possible. Automated compensation of background radiation, therefore no light absorber required. An automated check of the zero and reference point is on board in the device. • Emission monitoring of power stations and waste incineration plants • Monitoring of dust concentrations downstream of filter plants • Monitoring of dust loads in factory workshops • Control of fresh air supplies and exhaust air plants • For very low to medium dust concentrations • One-sided installation • Contamination check • Automated thorough check of zero and reference point • Automated compensation of background radiation, therefore no light absorber required • For medium to large duct diameters Device properties: