The Pepperl + Fuchs Ultrasonic Sensor features an IO-Link interface for service and process data and is programmable via DTM with PACTWARE. It provides a continuous distance value through IO-Link process data. The sensor has a sensing range of 60 to 800 mm and an adjustment range of 70 to 800 mm, with a dead band from 0 to 60 mm. It uses a standard target plate measuring 100 mm by 100 mm. The transducer operates at approximately 255 kHz. The response delay is a minimum of 13 ms, with a factory setting of 49 ms. The sensor cycle time is at least 13 ms by default and can be programmed up to 60 seconds. Selectable sound lobe width Synchronization options Temperature compensation Push-pull output